...fan belts goes to it. The pulley on the alternator has a belt on it. Follow the fan belt which goes towards the rear of the engine. Charlie PS You may have to get under the van to remove it. 1989 ...
...belts bysliding them off of their pulleys to gain more work room. Step3 Remove the enginecooling fan and the radiator shroud. This step is vehicle-specific, andno single process will cover all ...
...fan cannot activate while servicing the belt(s). NOTE: Take a good look at the installed belt and make a note of the routing. Before removing the belt, make sure the routing matches that of the belt ...
...pulley Fan: Internal Regulator: Internal Regulator Plug Clocking: 11:30 Notes: This unit is supplied with an OE style pulley clutch which rotates freely in one direction only. Trying to force the ...
...pulley. This was designed to keep the fluid off the timing belt. Mine dripped along the casting and dripped on the ground which made it appear to be coming from someplace else. You will have to get ...
...fan belts squeak for several reasons 1 incorrect belt for pulley.2 belt running on the botton of the pulley and worn pulleys. To check measure across the top part of the pulley and the widest part ...
Usually answered in minutes!
692 Questions
458 Questions
413 Questions
309 Questions
262 Questions
