...with two problems, i need the setting diagram for the timing belt and the last one the electric fan does not come on both for the air conditioner and radiator please help. Its a 1.6 twin cam 323. ...
...fan belt to mazda 323 slacken the alternator pivot mounting bolt and the adjusting arm bolt then move the alternator towards the engine . slip the drivebelt off the alternator pulley.refitting is the ...
...fan belt snapped so dont no how to fit slackend alternater but there is alower outer wheel with belt that goes to power steering pump i think how do i slacken that belt and do the belt go round the 3 ...
...fan belt The belt runs on a number of pulleys. One of which is the bottom one, called the crankshaft pulley. This is the one rotating when engine runs, driving the other pulleys with the belt. The ...
...pulley. Install and tension the drive belt(s). Attach the cooling fan to the water pump. Refill the system with coolant. Start the engine and check for leaks. Front Wheel Drive GLC Drain the engine ...
...at least the easiest way to replace the belt and the tools needed. what is the part number of the fan belt and alternator belt of the madza 232 famila what is fan belt number for altinator mazda323 ...
...fan belt, 4 bolts and it's off? found this from answers.com.....1. Depressurize and drain the cooling system. 2. Loosen the alterantor adjustment and remove the belt. 3. Remove the water pump pulley. ...
my mazda 323 1997 fan belt keeps burning out on 3rd one and burning again now battery keeps dying anyone help problem wth alternator bearings or one of your pulleys where belt runs is stiff or seized
...fan or air conditioner operation because much of the turning power supplied by the main drive pulley is lost.The belts should be inspected and/or adjusted at 2,000 miles (3,221 km) and then every ...
Usually answered in minutes!
368 Questions
126 Questions
85 Questions
70 Questions
61 Questions
