Questions & Answers for: Ford Ranger fan pulley

Question about 1999 Ranger SuperCab

1 Answer

...will be i nthe way. You must remove the fan and clutch, then the pulley then you will have access to the water pump bolts as well as the other components which must be removed to get the pump

Ad

Question about 1986 Ranger 2WD

1 Answer

...fan and crank pulley are removed you should have complete access to the timing cover. open it and its as simple as lining up the confusing timing marks on the crank and cam when you put the belt on ...

Ad

Question about 2001 Ranger Regular Cab

1 Answer

...pulley clockwise until you can slip the old belt off. Snake the old belt around the fan and discard it. Check all pulleys for embedded gunk and clean as necessary. While not absolutely necessary, I ...

fan belt on 1999 ranger 3.0 keeps jumping off and shredding at water pump Check that all of the pulleys are in alignment and in the same 'plane' with each other. Also, check with the belt off for ...

...fan and fan shroud.remove engine mount bolts,raise engine at front pulley with block of wood between jack and pulley. make sure distributor cap won't hit firewall, you may have to remove

Question about 1993 Ranger SuperCab

2 Answers

...fan clutch to try and keep the pulley it screws onto from spinning. No success. I tried a few things to jam the pulley while I twist of the clutch, but nothing seemed to work. Anybody else have these ...

...fan and pulley on a 1987 ford ranger 2.9 v-6? the plastic engine fan is cracking out and i cant get the clutch fan off the water pump. i removed the 4 bolts holding the pulley off ant the pulley is ...

Question about 2003 Ranger Regular Cab

3 Answers

fan and it's centre spindle or bearing. Now re start your engine and you should have solved the mysterious squeal. Repeat every two months or so and your motor will be back to a quiet and happy beast.

Question about 2003 Ranger Regular Cab

1 Answer

...fan idle pulley and the belt Hi, I'm glad to help! First you need to remove the drive belt and spin the Alternator, A/C Clutch and Water Pump pulley's and see if you hear the squeal. Its possibly it ...

...fan belt, idler pulley & tension pulley, still squeaks, any help would be appreciated! oh yah have your harmonic balancer cheched because you can change every thing but if the balan. gets out of wack ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...