...fan or waterpump. Hello, look on the left (driver side) front of the engine, you will see at the end of the closest to you, on the cylinder head, a pulley. This pulley runs your water pump, by a belt ...
...PULLEY I HAD A LARGER BELT AND ANOTHER BELT TGOES FROM THE CRANCK TO THE A/C UNIT AND ONE FROM THE ALTINATOR TO THE FAN. WELL I FORGOT HOW THE BELTS GO ON I NEED HELP IMMED. THANKS, TERRY WILLIAMS ...
Question about 1985 Eldorado
...and its not charging and its overheating but the belt that runs from the alternator to the cooling fan is fine. I can't figure out how to get the other one on? Take a look at the front of your ...
...fan and the pulley pull off.You'll probably have to remove the top of the fan shroud to accomplish this. They are 2 separate pieces. I'd check a scrap yard for a replacement pulley. They will need to ...
...fan/heater cant seem to get it over the last pully ? is there somthing i need to do to allow me to get the belt on the pully? You need to locate the tension pulley and by moving it with a wrench you ...
...TORQUE STRUT.DISCONNECT THE UPPER TRANSAXLE OIL COOLER LINE.REMOVE THE RIGHT AND LEFT COOLING FANS.REMOVE THE SERPENTINE BELT FROM THE ALTERNATOR PULLEY.REMOVE THE BOLT FROM THE FRONT TOP AND ...
...fan pulley. Sometimes Cadillac does things a little different, so it's possible they may not all go over the fan pulley. You may also have grooves that aren't used depending on your options. ...
fan.Remove the serpentine belt from the generator pulley.Remove the bolt from the front top of the generator, and the bolt from the lower front of the generator.Detach the harness connector and output
Usually answered in minutes!
267 Questions
254 Questions
223 Questions
206 Questions
198 Questions
