Questions & Answers for: Oldsmobile fan pulley

...Pulley is bolted to the water pump. If the pump shaft failed you need to replace the pump. If you have a clutch on the fan, and that failed, providing that the pump shaft is not loose or binding and ...

pulley away from the serpentine belt), and slip the serpentine belt off of the pulleys. The belt diagram of how the belt is placed around the pulleys, should be on the fan shroud support, or under the

...fan shroud area but basically the grooved side goes against the grooved pulleys and the smooth side goes against the smooth pulleys relieve the tension by moving the idler pulley to make the belt ...

...fan.Auto Zone will usually have tools to loan out.There are holes in the pulley that the tool goes into so you can hold the pulley and then the other tool goes on a 1/2 inch drive breaker bar and on ...

...balancer pulley The fan clutch is connected to the water pump. The harmonic balancer is the crank pulley. If the fan clutch/pulley the fan clutch is attached to is sloppy than the water pump is

...fan bet pulley or compressor is not turning with the fan belt. I asked a mechanic if you can bypass the A/C compressor air conditioning is not important right now my question is can you install a ...

pulley to release the pressure on the fan belt and slip it off the water pump pulley.now remove the bolts from the water pump pulley. now all you have to do is remove the bolts that attach the pump to

removing a power steering pump for an 85 cutlass salon 307 engine i find it easier to remove the fan shroud then the pulley then remove the mounting bolts as some are behind the pulley

...pulley is released.12Replace the power steering pump hoses and refill the power steering pump fluid to the proper level.13Replace the radiator, fan and fan shroud by securing the radiator into the ...

antifreeze leak leak is coming from up under top pulley arm that pulls my fan belt. Sounds like it might be a leaking water pump behind the pulley.