Questions & Answers for: Mitsubishi fan pulley

...pulley and the belt will come right off. Pull the belt forward and rotate the fan blade to completely take to belt out. Use the same rotation of the fan belt to install your new belt. Tighten the ...

fan catching bottom pulley 1997 mitsubushi shogun i am a dizzy female my shogun started to make a bad noise on looking the fan is catching the bottom pulley any help on what might be wrong would be ...

...so loud that it rattles the whole car it may not be the fan. most likely is the compressor. check the belt or the pulley is not mounted coorectly or one of them is bend. lastly check the engine

...pulley it is. The cooling problem may be related (water pump) , or just a failing fan switch, or fan. See if you have two, as some vehicles have one, and a second for air conditioning. LOOSE BELT IS ...

...up on the pulley and take the tension off of the belt. There should be a schematic for the routing of the belt on the fan shroud, If not, draw one before you remove the belt. Don't rely on

...fan belts. You should have an alternator, power steerring, air conditioning and crank shaft pulley that the belts run on. There should aslo be a pulley for the water pump. use the process of ...

mitsubishi mighty max 3.0 v8 loud noise coming from the fan area my truck has a grinding sort of rattling noise coming from the front fan and the belt area, it gets loud when i accelerate only and the

...front crank seal housing Remove radiator fan,radiator, belts, pulleys, including the main pulley connected to the crankshaft. The work required is almost similar to replacing the timing

pulley and now im stuck, for the noise still persists. what should i do? The fan belt is probly worn or dirty. Try cleaning the underside or the pullys in the serpintine route............or u mite hav

...pulley directly behind the fan in the upper portion of the front of the engine. 2 Loosen the adjuster bolt on the tension pulley bracket. This bolt is on the left-hand side, situated in a long ...