Questions & Answers for: fall board shut

board just shuts down, like the power is shut off. The red power lite is off. It's hard to get the board to power back up. The cleaning cycle still works. Tink it might be the board? Jonnie Stephenson

...washer on it starts up for about a minute and shuts off Check the door lock,if the latch does not fall in place correctly the door will send the message to the electronic board that the door is

...board that falls out of it's cradle which causes it to fall on a metal plate shorting it out.The fix that worked for me: I carefully removed the gray rubber cover from channel and volume control with ...

board shut down the computer.in less it was total shorted. it sounds more like the fall my have damaged the hard drive. if a the drive wont spin it will cause the laptop to power down cause the little

...board that the TC connects with. The burner TC is supposed to shut off the gas supply if no flame is detected quickly, to prevent an explosion. If this device or the board has failed, the gas shuts ...

...shut the unit down on a full bin. When a drop occurs the control board sees a open and then close of the switch and restarts a freeze mode. If the ice drops and the bin is full the curtain is blocked ...

...fall back out after shutting off and restarting. any ideas why it keeps losing its alignment at bottom of screen? it is the convergence board you may be able to have a tech come out and go into the ...

"my bush tv keeps losing sound and picture after "my bush tv keeps losing sound and picture after 2,3 hours from" -- because it falls within my area of expertise. I just need a few more ...

...board after the fall , can be a shift in the board, the aligment or the drive. You need to remove the battery and open the camera, check with an obserrvation lens for cracks, shift or alignment ...

...blower won't shut off.How can I fix this? I installed a new circuit board and it did the same thing Take look at the afc automatic fan control works on temp rise and fall it controls the fan on and ...