I need the circuit board that the cross fader connects to. It is for the Technics SH-DJ1200 mixer. I have fitted a new cross fader and I am encountering bleeding. If the cross fader is over to the ...
Question about 1604 Vlz3 16 Channel Mixer
No volume control with 2 faders on Mackie CR1604 mixer I have an older Mackie CR1604 mixer (not the newer VLZ Pro model) that has 2 channels that don't work correctly. With the faders positioned ...
Question about Handycam DCR-TRV16E Mini DV Digital Camcorder
How can I get the fader on my Sony DCR-TRV16 to turn off? I cannot turn the Fader off on my camcorder. Press again same fader switch to get fader function disable.
Crest Audio Console Fader Distortion At certain points in my fader position in a channel the channel will distort. The Pre Amp is not being overloaded as is no other part of the board. What part of ...
Question about DJm600 DJ Mixer W/Sampler Black Version System
I want to replace the fader on channel 2 of a djm 600 that Irecently purchased. I ordered part # DCV1010 which is a replacement fader. Will I need to un-solder the existing fader from the board, or ...
What is the value of mackie's faiders and master faders The channel faders will be a 10K with standard fader taper. The master fader is a 50K dual, with standard fader taper.
Question about Am 844d Mixer 8 Mic/line 4 Stereo 4 Group Mixer
faders not working properly on am844d right channell goes in out when I wiggle the main L/R fader. Some of the channel faders are eractic. The level of volume is not responding right to fader movement
Question about DJm 400 Professional DJ Mixer
Hi i have broken 1 of my faders off of my pioneer djm 400 mixer but it isnt snaped can i repair myself??? The fader pot will need to be replaced. There is no way to glue or repair the tab. You will ...
What type fader should I order for Behringer 2442FX where can I order this Fader I would contact Behringer directly..here BEHRINGER Limited Warranty You may need the manual here Behringer XENYX 2442FX
How do is fix my Numark m6 bleeding cross fader /it's most likely a defective fader, but before replacing it, get a can of Deoxit5 or fader cleaner and spray inside the fader, then move it the full ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions