...CAUTION! Reverting to the factory default settings will delete all the printer settings you selected, including Speed Dial and Group Dial numbers. Next, try sending a fax and let me know the
Question about X8350 Print, Scan, Copy and Fax All-in-One Multifunction Printer Plus Photo w/USB Printer ...
...factory settings Lexmark X8350 Wish to change Lexmark X8350 factory default printing setting to one of my choosing. Please follow the steps given below: 1. Press "Fax Mode" button. 2. Press "Menu" ...
Question about X6650 4-In-One Wireless InkJet Printer
...factory default settings. Reconfigure the printer with the printer settings (Country, Time, Date, etc.) Try copying. NOTE: Wireless connection won't be affected when resetting printer to default ...
Question about X4270 All-In-One InkJet Printer
...factory settings. If the printer still won't turn off using the power button, unplug the power adapter from the printer. The power adapter is the rectangular black brick behind the printer where the ...
...factory default settings. Press Settings button -> Defaults -> Set Defaults -> Use Factory -> press Check. You will be asked to setup your printer settings like you're setting it up ...
Question about X464DE Mono Laser MFP, 38ppm A4 Mono, Print/Scan/Copy/ Fax, Duplex, USB/Ethernet Interface, ... All-In-One Printer
...DEFAULTS sets the MFP non critical parameters back to the factory settings. Note: Some settings are not affected: panel language, energy conserve, paper prompts, registration margins, and page
...Factory Default Settings: Press the Copy button on the operator panel. Press the Options button until SET DEFAULTS: Use Factory is displayed, then press Select. Enter your preferred Language, Date, ...
...Factory, press OK. You will then be asked to select/enter your preferred printer settings just like the first you set it. Source: How to Reset the X5600 and X6600 Series Printers to Factory ...
...factory default settings, follow the steps below: Press the Settings button on the printer operator panel. Use the arrow keys to move through the selections until Defaults is displayed. Press the ...
...settings. (Factory defaults may vary for different countries.) When you select a new setting from the operator panel, the Saved message appears. When the Saved message disappears, an asterisk appears ...
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions