Questions & Answers for: Ford Bronco II exhaust valve

Question about 1988 Bronco II

1 Answer

...valve/lifter noise could be the oil pump is not pumping enough oil up to the top of the motor. I suggest doing an oil change(if you haven'y aleready), be sure to flush several quarts through, after ...

Ad

Question about 1990 Bronco II

10 Answers

...exhaust like is there lots of water dripping from tail pipe. - you have no pressure regulation. Hope some help Regards The quick test connector you need is attached to the same harness as the larger ...

Ad

Question about 1988 Bronco II

1 Answer

...fluid it will run fine the rest of the day. The other problem is its blowing alot of carbon out the exhaust. Temperature extremes don't have any effect on it's starting . Is this a fuel injection ...

Question about 1986 Bronco II

2 Answers

...valve. Check coolant level It does sound like you have a bad head gasket,pull your radiator cap and check for oil and the odor of exhaust or fuel and also check the level,if your pulling coolant into ...

exhaust and intake which is which on the cylinder heads on a 1984 bronco 2 2.8L? Valves always line up with the port that determines its use. Intake will line up with the runners on the intake ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...