Questions & Answers for: exhaust valve

Ad

Question about 1999 Cougar

1 Answer

...valve. Remove the exhaust gas recirculation valve. Disconnect the vacuum hose. Installation CAUTION: When cleaning the gasket faces, do not allow debris to enter the intake manifold or exhaust gas ...

Ad

...exhaust valve (6505) No. 1 intake valve (6507). No. 3 exhaust valve No. 2 intake valve. No. 6 exhaust valve No. 4 intake valve. Rotate crankshaft (6303) 360 degrees to position No. 2 and check the ...

Ad

Question about 1997 Taurus

2 Answers

...exhaust valve closed Compression: Piston going up, intake and exhaust valves closed Power: Piston going down, intake and exhaust valves closed Exhaust: Piston going up., intake valve closed, exhaust ...

...exhaust valve as the piston rises to the top again (4th stroke exhaust) as the exhaust valve lobe rocks off the intake cam lobe should be starting to rock on opening the intake valve on the down ...

Question about 1972 350 Scrambler

2 Answers

...exhaust valve = 0.25mm(0.010 in)for reference only when the engine is cold,valve clearances:intake valve   = 0.25mm(0.010 in)exhaust valve = 0.30mm(0.012 in)engine specs: mitsubishi 4g13 ...

...exhaust valve, and the intake lobe will just be ready to open the intake valve. See, as the piston rises on the exhaust stroke, the exhaust valve is open. When piston reaches TDC, the exhaust will ...

Question about 1972 350 Scrambler

1 Answer

...flap back away from the exhaust pipe. If at anytime the bill sucks up into the exhaust, then you do have an exhaust valve too tight. Its kinda like this: ...

exhaust valve will open. At TDC of exhaust stroke, exhaust valve will be closed, and the intake valve will then open as piston is moving down. If you have the intake valve opening right after TDC, you

Exhaust valve at for the push rods location of Exhaust valve with out taking it all apart again There is no "exhaust valves" for the push rods. If you are asking where the exhaust valves are, they are

...Exhaust 0.8mm 0.5mm Valve stem bend 0.05 mm TIR Valve stem diameter: Inlet 4.975 4.990 mm 4.96 mm Exhaust 4.955 4.970 mm 4.94 mm Valve guide inside diameter 5.000 5.01 2 mm 5.08 mm Valve/valve guide ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...