Questions & Answers for: Buick Rendezvous exhaust pipe

...exhaust pipe and gave up on that approach when I tried to loosen the crossover bolts that were beyond difficult. I managed to loosen the black pipe above the crossover that carries the coolant and ...

Ad

Question about 2004 Rendezvous

2 Answers

exhaust pipe. - Remove the radiator hose from the thermostat housing. - Remove the thermostat housing bolts and clean any sealer from the bolt threads. (IMAGE: Removing the housing bolts) - Remove the

Ad

...exhaust pipe and throttle body are in the way but it will come out. It's also very easy for the thermostat to get out of place when trying to get the housing, thermostat, and bolts back in that tight ...

Question about 2002 Rendezvous

1 Answer

...exhaust crossover pipe. Disconnect the radiator hose from the thermostat housing. Remove the mounting bolts and remove the thermostat housing. Remove the housing gasket. Remove the thermostat. Clean ...

...one on the exhaust pipe close to the engine. Sensor B is behind (or in) the catalytic converter. Now we need to know if it is on bank 1 or bank 2... you can get them off with s 13/16 socket or

Question about 2004 Rendezvous

1 Answer

...exhaust pipe. Remove the radiator hose from the thermostat housing. Remove the thermostat housing bolts and clean any sealer from the bolt threads. Removing the housing bolt.. Remove the thermostat ...

Question about 2002 Rendezvous

1 Answer

...exhaust crossover pipe. Below I've included removal and installation instructions. Also, the procedure for bleeding the coolant system is critical; if you need those instructions please post the ...

Question about 2002 Rendezvous

1 Answer

...exhaust pipe studs.  Sometimes the little 8mm bolts will also break, but since they only hold the heat shield, it is of no great consequence.Then all you have to do is remove the two bolts that ...

Where is the H02S loctated on a 2002 Buick Rendivous Heater performance bank 1 Sensor 2 It is under the vehicle, behind the catalytic converter ******* into the exhaust pipe. The only one down there.

...Do I have to take the the exhaust cross over pipe off? I don't. But I do remove the throttle body for easy access. You can still get the bolts out with out removing the cover. Just a major

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...