Questions & Answers for: Chevrolet Monte Carlo exhaust

Question about 1985 Monte Carlo

1 Answer

monte carlo emmissions my monte carlo was fixed, but it blows exhaust out of all these hoses in the front bring it back to whom ever did the exhaust. appearently missing bolts or gasket from the ...

Ad

Question about 2001 Monte Carlo

1 Answer

...same. can you pleas help me out to find th problem I too would have pointed my finger at a plugged exhaust. When you dropped the exhaust did you try to drive around the block? If not, give it a go. ...

Ad

need to know if long push rod goes into the exhaust valve Does long push rod go into the exhaust valve in a 3.1 engine of a 1996 Monte Carlo? Long push rods are for exhaust valves. Short are intake.

...temperature is below 120°F (48°C). Excessive removal force may damage the threads in the exhaust manifold or pipe so follow the removal procedure carefully. Disconnect the negative battery ...

i have a 1997 chevy monte carlo 3.1ltr how do i know witch valve is intake and witch one is exhaust on the head? Whatever side your throttle body is on is the side your intake valves will be on. Also,

Question about 1996 Monte Carlo

1 Answer

What are the torque spec's for the exhaust What are the torque spec's for the exhaust manifold on a 1996 Monte Carlo with a 3.1 engine. to torque nuts and bolts start in the center using a criss cross

...is below threshold bank one. Usually replacing the O2 sensor that's the front most in the exhaust system will cure your problem, Your Check Engine light is on and you find a P0420 code for

white smoke from exhaust in 1996 monte carlo what can be causeing white smoke from exhaust in 1996 monte carlo? Head gasket failure or a crack in the cylinder head allowing engine coolant to enter the

Question about 2000 Monte Carlo

1 Answer

where is 02sensor monte carlo inthe exhaust pipe just below the manifold 4cylinder has one to two v6 0r v8 has two to three all are in the exhaust one is usually behind the cataly tic converter the ...

2001 Monte Carlo 3.8 Oxygen sensor location Oxygen sensor cause of P410 ? Look on the exhaust pipe ahead of the catalytic converter you will see it there also where the exhaust hooks to the exhaust ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...