...then i doubt it would be the piston rings. With the limited information i would say to check the exhaust gasket between the exhaust port and the exhaust itself. Sometimes these can degrade and ...
Question about 43991 - TS700 & TS800 Cut-off saw Filter
...spark plug hole but will not fire. check the compression I found a critter made a mud nest in the exhaust and completely blocked it. After stripping the saw I couldn't find anything wrong ...
Question about Bg 55
when I pull start my stihl 55 leaf blower gas comes out exhaust port what is causing this gas comes out exhaust port when I try to pull start stihl 55 leaf blower what is causing this blower will not ...
Which way does arrow on piston face [ intake or exhaust ] Face toward the exhaust port
...one screw that say's LD and it doesn't matter turning it. Could be Excessive carbon build up in exhaust caused problem. Remove muffler and clean exhaust side of
stihl blower is too loud the exhaust has a hole in it ??? or is full of carbon replace the exhaust box
...clogged. Either way remove the screen and leave it off. When they get clogged they do not let the exhaust vent. With no venting you get incomplete combustion and a machine full of very oily gas as ...
Wood boss exhaust leaking Exhaust is leaking hot fumes in one spot at top of metal cover and is burning a hole in the plastic cover above the exhaust box. I have pulled the front cover off the exhaust
...on the carb. If you pull too manyoung times, it could be flooded. Wait a little, now remove the exhaust, spray carb cleaner into the exhaust port and plug hole... give 2 slow pulls, just enough
Question about TS420
...and checked for spark. I did compression check and got 105 psi with 8 pulls still no start. Checked exhaust screen it is clean. Any other ideas check that you have reconnected the fuel and primer ...
Usually answered in minutes!
61 Questions
59 Questions
27 Questions
22 Questions
19 Questions