Question about Satellite A100-S8111TD Notebook
...A105--ethernet green light not connecting ethernet green light not connecting--internet, applications, power all on--help you may need to give ipd adress or check where lan card is disable or ...
...ethernet adapter on your laptop connect it to a network hub, check the hub and see if you have a link light on the hub and or laptop.. To test your wireless router, connect it to a known working ...
...ethernet driver from here: http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp just select the model and download the drivers and install them on your laptop. cheers I have an old toshiba ...
Question about Satellite 2410-S203 Notebook
...light on the ethernet port on the laptop doesnt even turn on either. Is there anyway i can get this fixed?? i have assignments to submit and going crazy cause this has laptop has the software. Any ...
...ethernet card and it says device is working properly but it's not detecting that the cable is plugged in need more trouble shooting tips i can connect wireless but not direct make sure you donot have ...
light TIPS: --whenever you plugged the ethernet cable on your laptop ethernet port you'll notice that the computer icon on the lower right side will show that there is no more red x on it and when you
Ethernet is not working. Enabled in BIOS. Device Manager says it is working. Known good cable and connection. No lights at ethernet port. try updating the driver for it,iv run into this problem before
...ethernet port has a green light, and a flashing yellow light, but the internet still doesn't work. The lights means the port is active and working. Does the lan connection show as connected ...
...light on ethernet orange blinking light for ethernet cable orange blinking on ethernet means that your connection is 10 Mbps and green blinking means 100 Mbpsthere's nothing wrong with it Check ...
Question about Satellite M45-S331 Notebook
Computer Problem with Ethernet orange blinking light check/reset modem cable/power connections. to do this, disconnect each cable (one at a time) wait 10 seconds and reconnect.
Usually answered in minutes!
1,650 Questions
1,307 Questions
1,252 Questions
1,162 Questions
1,043 Questions