Questions & Answers for: error light stays on

error light stay on The error light stays on even when reset probably needs a new printhead. try switching with a good if know a friend with bjc 50/80/80. all are compatible.

...light goes on, not blinking, and no copies come out of the printer. tray this The procedure for the factory inspection mode is as follows. (1) Turn off the printer power switch, open the front cover, ...

after replacing toner cartridge, error/toner lights stay on Why do the error and toner cartridge lights stay on after I replaced the toner cartridge on my Dell 1710 laser printer? Open the front of ...

But,.. you said the light are on. try to resinstall driver. after printer recognised by comp, check status monitor. Green light on is power on, and red on mean chip error/ink out error/cartridge error

...light constantly stays on what can I do to get it off This indicates a problem some where in the ABS system. Get the cars computer scanned for error codes , This should nail the problem .replace or ...

not printing and all the error lights stay on The printer is no longer printing. All the error lights (Tonner, Paper, warning) stay on. When you switch off and re-start goes back to the same error. no

...a problem. The error code will be held in the copmputer, so the next step is to pull the error code(s)... However, if the light stays off, perhaps something hiccuped, and you need not

...light and error light stay on Early on when I bought the printer, I had to turn it off and on again before it would go line. The processing data and error lights stayed on. Now when I turn it on the ...

on the engine light staying on Try tightening the gas cap. If this doesn't fix the problem you need to take it to a mechanic or dealer that can read the error code that is causing the light to stay on

...a self check every time the key i turned on. If the system comes back all clear, the light goes off and the system activates. If there is an error, the light stays lit and the system remains