Questions & Answers for: Kymco Stryker 125 engine timing marks

Ad

Question about 2002 Stryker 125

1 Answer

Clutch when my bike is driving the clutch is slipping. what would be wrong? and could i repair my bike myself? it is a Kymco Striker 125cc. ok there is two solutions to this prob to consider first try

Ad

Question about 2001 Stryker 125

1 Answer

timing headcam ive seat my kymco stryker headcam to TDC everything is alined right i think ive T marked off and the top is two holes that are a lined and the cam is seat at 00.3 still isnt runing is ...

Ad

Question about 2004 Stryker 125

2 Answers

engine how can i adjust the timing on it? Ask here. They are specialized on finding english manuals for chinese gadgets. Line up the magneto timing mark for top dead center with the mark on the engine

...2T 50 for repair? I need to know what part I need to take off to get to the crankshaft? Take the engine out and completely disassemble the engine and cases as the cases need to be split to get ...

Question about 2005 Stryker 125

1 Answer

loaded by the cam) front of cam chain taught, proper tourque on cam caps realese cam chain tensioner, rotate engine 360deg slowly by hand with spark plug removed, then re check cam timing is accurate.

Question about 2005 Stryker 125

1 Answer

...does the same thing again further on down the stretch of road. What could be causing this? Hi The engine is heating up. You need to change the engine oil. This is a forced air cooled motorcycle... ...

Question about 2005 Stryker 125

1 Answer

Oil was gushing out the overflow pipe connected to the top of the engine that is routed to the back of the bike towards the rear wheel. Amature rider that kept it in 1st gear the whole time.What could

Question about 2005 Stryker 125

1 Answer

...1: Go to mechanic Option 2: Adjust the tappets. If you have never adjusted tappets or worked with engines before it is better to have someone experienced with you. The following is the procedure I ...

Question about 2001 Stryker 125

1 Answer

engine starts when put in gear it stalls check the switch on the stand may not be opening. normally if you leave the stand down it will cut the engine when you put it in gear, its a safety switch.

Question about 2005 Stryker 125

1 Answer

timing position can sum 1 help plz the any marks ther is are 2 small lines ant a f & t on the cam bt no marks on the timin chain apart frm 3 holes 2 small 1 big can sum1 help plz Line up the holes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...