...engine cam can meen up to 16 degrees of timing lose either way of perfect. once aligned, put the center cover back over the crank shaft, bolt on. put on the oil dip stick, put on the water pump pully ...
...timing marks and positioned the distributor to the right place. I have fuel, fire, and compression. I can't hear change in the engine when i turn the distributor when cranking. I'm at a loss on this ...
...timing marks. you have to turn the engine over clock wise untill you see them. There are 3 lines, line up the middle line with the pointer, put the left cam shaft sprocket mark straight down and the ...
engine up near the firewall. The timing marks are there. If there are two green electric connectors on the drivers side near the firewall, connect those when timing. Make sure you disconnect after you
...engine Passenger side timing belt (No. 1) and No. 1 tensioner Disconnect the negative battery cable. Loosen the water pump pulley mounting bolts. Loosen the alternator mounting bolts and remove the ...
Usually answered in minutes!
97 Questions
60 Questions
48 Questions
48 Questions
40 Questions