Questions & Answers for: Pontiac Grand Prix engine timing marks

engine timing where are the timing marks on the cam 1993 chevy blazer s10 how to time it firing order is stamped on the intake manifold ignition marks are on the crank pulley put the #1 plug on ...

how to time engine for a new timing belt for a 3.4 v6 There should be a mark on the timing gear, and another on the bottom pulley. They should be lined up with one another.

engine with no timing marks and rebuild the distributor as well and fit that in.Also then start with a starting handle of max of three swings .But please be more specific when asking questions because

...timing pulleys and engine housing, so it can be put back in exactly the same position. Then, remove the bolts on the timing pulleys and use an extraction tool to pull them off. Generally, most pulley ...

engine. What that means is when the timing belt breaks or becomes loose and jumps time. The pistons will interfere with and bend any valves that happen to be open. This not only damages the valves but

engine done? No. You should replace the head gasket (or have it replaced). Pay attention if you do it yourself. Change the timing belt, water pump, and accessory drive belts when you do it. Be sure to

...timing mark. Should remember but don't, No. 1 is drivers side ?? Looking straight down at the motor, it is the one farther foward. Two major things wrong with this answer: First: NEVER insert a ...

firing order for engine and from cap pleasse? you have to place cylinder 1 end of compression timing mark to 0 then remove cap the rotor is on number 1 . for firing order I need to know what engine

...to set the timing. There should be a pointer or timing mark on the cam with timing marks on it. You need to align the mark on the cam with the pointer while the engine is running with a timing

...the timing significantly. I would have the problem diagnosed and fixed by a professional. The 3.8 litre engine is a powerful engine and incorrect timing can cause significant damage to this