timing headcam ive seat my kymco stryker headcam to TDC everything is alined right i think ive T marked off and the top is two holes that are a lined and the cam is seat at 00.3 still isnt runing is ...
I have KYMCO S 200 and need to know what needs serviceing at 300 miles. What type of oil to use in engine and gearbox and what type filter if needed. At 300 miles the only thing you might want to do ...
loaded by the cam) front of cam chain taught, proper tourque on cam caps realese cam chain tensioner, rotate engine 360deg slowly by hand with spark plug removed, then re check cam timing is accurate.
...timing mark. Keep turning the engine over and watch your valves, wait for the exhaust valve to close, inlet valve to open and then close again then the next time you see the T line will be TDC. This ...
Hi there What type of oil can I use for an oil change on my kymco zing 125 with a four stroke engine For your bike you should use 15w 40 oil. Buy some better known mark oil.
timing position can sum 1 help plz the any marks ther is are 2 small lines ant a f & t on the cam bt no marks on the timin chain apart frm 3 holes 2 small 1 big can sum1 help plz Line up the holes
Question about 2005 Stryker 125
...timing incorrect/poorly tuned engine 7. Internal engine problem, flywheels shifted. 8. Broken frame. For more information about your issue, please visit the websites below. Good luck and have nice a ...
timing marks for a kymco venox Hi, Scott for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a
Question about 2005 Venox 250
the location of cam sprockets were the marks should point when piston is at TDC on a 2000 kymco venox motorcycle Hey Scott.. not sure of the marks.. BUT the cam lobes should be opposite of the rocker ...
Usually answered in minutes!
32 Questions
31 Questions
21 Questions
21 Questions
22 Questions