Questions & Answers for: Honda engine timing marks

Question about 2001 Civic

3 Answers

...timing belt on a 1997 Honda Civic w/ a 1.6 liter engine also doing the water pump. Ars there any other things that should be done at this time like seals or anything? and can I get specs on how to ...

Ad

...engine see no timing marks how do i set timing Check the position of the timing marks. The timing pointer mustbe perfectly aligned with the TDC (white mark) on the flywheel orflex-plate; the camshaft ...

Ad

Question about 1992 Accord

1 Answer

...engine and if the timing belt let loose there is a good chance the pistons met the valves and bent them. I'm thinking that you have a compresson problem either caused by bent valves or having the ...

timing marks on a 1970 cb 350 On the left side of your engine, you will see a round cover. If you remove this round cover you will see a fly wheel with a big bolt head, if you spin this bolt head with

Question about 1972 CB 350 F0

1 Answer

...timing belt.I then replaced the belt with the crankshaft mark straight up with marking on engine block,my camshaft marking also straight up with engine head how ever,engine will not start or make any ...

Question about 1994 Civic

1 Answer

...engine 4 turns counterclockwise, until the timing marks realign, loosen the tensioner and turn the engine again 3 teeth, torque the tensioner to 30 flbs. reinstall all the mounts and covers. all ...

Question about 1994 Civic

1 Answer

timing marks for crankshaft to replace timing belt. All Honda engines, except the Civic 1.3, 1.5, 1.6, 2.0 Vtec's and the CRv 2.0, will have the crankshaft mark that lines up with the gear key way

Question about 1997 Civic

1 Answer

...engine to the timing marks and if your engine is working ok,then use the marks by using some reflecting paint . Loose the timing tensioner and remove the belt. fitting the new belt and tensioner be ...

Question about 1988 Prelude

1 Answer

...engine. Check all four marks going across the two cam pully is lined up with the engine head surface. Then check the crank pully alignment mark the single notche align to the mark on the timing ...

timing as the engine speed increases. Many older bikes had a T mark and an F mark on the flywheel. T = Top Dead Center, F = firing mark. I had one of these in the early '80's, from what I remember you

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...