Questions & Answers for: Jeep Wrangler engine noise

noise in engine I have a 2006 Rubicon and the engine has developed a mild ticking noise at around 1900-2000 RPMs. The dealer has repleced the CAM and lifters, however, the ticking noise is still there

...noise beginning, press the end of the dowell onto the different parts of the engine, while keeping the other end of the dowell against your ear. When you find where the noise is coming from, you will ...

noise in my engine while i'm driving i already put a rebuilt engine in there along with a transmission i put alot of money in this car any suggestions Could it be an exhaust leak? A minor one can make

engine noise I have a 1997 Wrangler 2.5L. When running there is a good bit of noise that appears to be coming from the water pump. The rest of the engine is tight and clean. There are no oil leaks ...

engine noise (clacking) in 1988 jeep wrangler Is it possible to have the noise come from the fuel pump? Is your car injected or carbureted? which engine? If you have a mechanical pump mounted on the ...

...engine up again and listen. If you have piston slap the noise will have been greatly reduced or even eliminated for about thirty seconds seconds and then returns. The fix is to rebuild or replace the ...

engine warm up it developes a whistling noise. When I pop teh hood the noise appears to be comming toward the back of the engine compartment on the drivers side. What might it be? Could be just a belt

...engine noise when driving I have asked for clarification on this. Possible causes are bearings like wheel bearings, locked up engine cooling fan clutch and noise in the rear differential from ...

...almost anything? Check oil pressure. If you think the noise is internal engine and comes from bottom of engine, check for metal in the oil pan, metal in the oil pan is not a good sign. Don't drive

...engine noise (a wild useless guess, but ...)
x2 stethoscope ($5) or wood dowel. to ear opening can find which LHA lifter is making noise, if they are?, remove them clean them and prime the and put ...