Questions & Answers for: Oldsmobile Silhouette engine

Question about 2001 Silhouette

1 Answer

Engine wont start the engine oil filter came loose and all the engine oil drained out. Replaced and refilled oil but now the motor will not turn over. It will not even try to start. has your motor ...

Ad

Before servicing the vehicle, refer to the Precautions Section. Drain the cooling system. Drain the engine oil. Relieve the fuel system pressure. Remove or disconnect the following: CAUTION Failure to

Ad

1995 Oldsmobile Silhouette 3.8 liter engine I have a problem with the 3.8 engine in my 1995 Oldsmobile Silhouette Van. The engine runs fine at idle however at wide open trottle the engine surges. By ...

temp gauge in instrument cluster saying engine hot, but the engine is not actually overheating causing engine to shut down Could be the temperature sending unit, but make sure the engine is really at ...

Question about 1999 Silhouette

2 Answers

99 olds silhouette check engine light blinks.Engine is running rough and the smell of unburnt gas is coming from the exhaust.Also noticed a burning smell coming from between the engine and firewall. ...

Question about 2000 Silhouette

1 Answer

Loses power when engine temp got hot. Not sure if this model has the feature, but other oldsmobiles will cutoff power to half of the engine cylinders when the engine overheats. THis is to protect the ...

1990 Olds silhouette at highway speeds engine stalls. shift to nuetral, wait for engine rotation to stop. restart and shift back to drive. engine runs normally for 1/2 to 2 miles then stalls again. ...

motor mounts, how hard are they to change? ENGINE MOUNTS NOT HARD TO CHANGE.YOU NEED TO SLIGHTLY RAISE ENGINE ENOUGH TAKE WEGHT OFF ENGINE MOUNTS WHEN REPLACING THEM.YOU CAN USE ENGINE CRANE WITH ...

...cap and subtract one for the coil wire When the sihlouette was first introduced there were optional engines, all 3 options were V6 engines. They were offered till 1996. From 1997 till the vehicle was ...

Question about 2000 Silhouette

1 Answer

how to oil pan out what engine type if you have the 3.4 engine you need a engine lift or engine support fixture you have to remove engine mount and engine mount bracket.also 3.8 engine you need engine

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...