Questions & Answers for: Chevrolet egr valve

Question about 2000 Impala

1 Answer

EGR VALVE HOW TO REPLACE THE EGR VALVE IN MY 2000 IMPALA 3.4 REMOVAL PROCEDURE Turn OFF the ignition. Disconnect the EGR valve electrical connector. Remove the bolt retaining the pipe assembly from ...

Ad

EGR Valve but with EGR Valve connected idle is bad I bought a new EGR valve but the same problem persists when the new valve is connected..... what is the problem? sounds like you have an egr solenoid

Ad

Question about 1992 S-10 Blazer

3 Answers

...EGR VALVE MY CHECK ENGINE LIGHT IN MY 2000 CHEVY IMPALA KEEPS COMIN ON AND THE PRINT OUT SAID EGR VALVE FAILED MY CAR IS STARTING TO RIDE REALY ROUGH DO I NEED TO GET THIS FIXED IMMEDIATELY The EGR ...

find a diagram of the locatation of the egr valve Exploded view of the EGR valve mounting (3.1L engine) EGR valve mounting arrangement (3.4L (VIN X) engine) View of the EGR valve mounting (3.8L engine

Question about 1997 Lumina

1 Answer

egr valve on. If the solenoid fails, the egr valve will not open. Follow the vacuum line on the egr valve--does it go to a solenoid valve? If yes, apply 12 volts directly to the solenoid blades to see

Question about 1998 S-10 Pickup

1 Answer

EGR valve is a PCM (Powertrain Control Module) controlled valve that allows measured amounts of exhaust gasses to pass back into the cylinders to be burned with the air/fuel mixture. Since exhaust gas

Question about 2003 Impala

1 Answer

...EGR valve) so as not to adversely affect the engine's performance. (Too much EGR and the engine won't idle). If you have a P0404, then the EGR valve is likely an electrically controlled EGR ...

Question about 2003 Impala

1 Answer

...EGR) valve pintle position input to ensure that the valve responds properly to commands from the PCM. When the ignition switch is turned ON, the PCM learns the EGR learned minimum position. The PCM ...

Question about 1997 Lumina

1 Answer

...EGR valve, EGR solenoid faulty, Failed EGR pressure sensor where applicable and Failed EGR position sensor where applicable. I took the EGR valve off and cleaned it out with carburetor cleaner and ...

...EGR valve light went off now its back on with same code what could it be? EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...