Questions & Answers for: egr ready new battery

Question about 1996 Caravan

1 Answer

...EGR system ready. Any solutions? It could take more driving always make sure you have between 1/4 -3/4 tank or monitors cant run has anyone checked to make sure the EGR is functioning? Not just the ...

Ad

Question about 1996 S-10 Pickup

1 Answer

...EGR system ready. Any solutions? I just had my '96 S-10 pick-up scanned and I had a "not ready" for the egr, oxegen, and catalist. 2 out of 3 on a '96 will pass. How would I solve these errors or at ...

Ad

...ready at hand. If your not sure, leave them on, but make sure key is off. Try again now, and see if code returns, if it does, get a new gasket for EGR valve, remove it & clean it thoroughly with ...

Question about 1996 Yukon

2 Answers

...ready to communicate or available" for #2 & #4 ( downstream. #1 & #3 are fine and reading.) this code means your catalytic converter is below efficiency status .the o2 sensors will not fix ...

...EGR valve first) 8.) making certain that you have a full battery charge, turn the starter switch to START for about 5 seconds... if your engine turns then your internals are not frozen... that's good ...

Question about 2005 Town & Country

2 Answers

...ready. Do I need to drive with the new EGR in for awhile to reset or clear anything before reinspecting again? YES. when you cleared the code the computer resets and you may have to drive it a while ...

...ready for catalytic converter, evaporative system, heated 02 sensor, oxygen sensor and EGR flow. Help! That should be enough time to reset the emission systems. Did you clear codes since then or ...

...Ready, EGR System---Not Ready. The only things that we have changed that may have anything to do with this is a new battery and O2 Sensor. Checked all fuses, all were OK To start with, if the check ...

...wait for the system to run internal tests then if it sees no issue it will clear and show ready. This is called an OBD2 drive cycle test. The EVAP system is slow to clear along with the EGR

EGR monitor being not ready. I drove 1500 already and no change. I also took the EGR off and cleaned the Carbon out of it and the hole it connects to on the throttle body. Please help, I am desperate.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...