Questions & Answers for: Jeep Wrangler earth leads

Question about 1989 Wrangler

2 Answers

...earth from battery to engine. If all fails try getting jumps leads and put one from battery neg to to engine and the other from battery pos to pos connection of starter motor. that should turn engine ...

Ad

...earth lead to the battery.Or bad connection at either end of it.Try this.Get some jump cable leads(booster leads).Hook one end to the neg.terminal of the battery and the other end to a solid point on ...

Ad

Question about 1993 Wrangler

2 Answers

...earth). Next take off the positive lead (marked with + sign on the battery and has the larger battery post). Undo the battery holding clamp. Remove the old battery and put in the new one, replace the ...

...the panel has a short on it,, its likle to be the voltage reg on the back of the panel shorting to ...

...earth leads where they connect to the Battery, Engine, Starter Motor and Body. If possible disconnect, clean thoroughly by removing any corrosion or paint that could cause a poor connection, and ...

...earth leads where they connect to the Battery, Engine, Starter Motor and Body. If possible disconnect, clean thoroughly by removing any corrosion or paint that could cause a poor connection, and ...

...prove otherwise. use a voltmeter, 11vdc cranking is PAR. not less. (less in Alaska, no location on earth stated and matters) , some times a starter can fail and it (electr motor) spins but the crank ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...