Questions & Answers for: e40 fault

Ad

Question about Lavamat 16810 Front Load Washer/Dryer

1 Answer

...prior to moving house e40 fault code is water level too low during heat which is very strange to appear at start-up. does anything else happen? without being certain, points to a main module ...

Ad

Question about FJS1225W Front Load Washer

1 Answer

...find the manual (surprise surprise!) mid wash an error came up and the machine started beeping - it was E40, any ideas? thanks! Niamh hi there e40 fault could either be your door interlock or main ...

Ad

Question about ZWD1470W Front Load Washer / Dryer

1 Answer

...door open, keeps coming up, machine will not start washing at all, please help. The door is not open! hi there e40 fault is a problem with your door interlock. get it replaced and all will be

Question about ZWF1430W Front Load Washer

2 Answers

...E40.door not locking.door interlock faulty or triac faulty on pcb hope this helps pls do let me know If this fault appears after you shut the door but before the programme starts then it's worth ...

Question about ZWF1430W Front Load Washer

1 Answer

...founf out that the code E40 means a fault in the door locking system. Just have to get my wife to push the door closed a little harder. Thank you for your assistance with this problem. Regards ...

Question about ZWF1430W Front Load Washer

1 Answer

E40 is a common fault relating to the door switch,how old is your machine because that model was first made in 2007 until the present so it may be worth your while getting in touch with your dealer or

Question about ZWD1470W Front Load Washer / Dryer

1 Answer

...E40 normally points to a fault at the door switch,sometimes when the door switch fault occurs it can also cause damage to the main P.C.B.(Programmer).As this machine is still in the major parts ...

Question about ZWD1470W Front Load Washer / Dryer

1 Answer

e40 fault n error code E40 = Door open, door interlock, wiring or main PCB

...with error code E40 E40 is a door lock fault code, you need to replace the door lock, you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job

Question about ZWD1470W Front Load Washer / Dryer

1 Answer

E40 Error Fault Code Electrolux Time Manager How to Fix Error E40 E40 indicates a problem with the door lock circuit in the appliance. It could be as simple as a faulty door lock or it can be a faulty

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...