...DVD-R..? To finalize; Navigate,,, SETUP(on remote),,,SYSTEM SETUP(on screen),,,,DISK SETUP,,,,,FINALIZE Yes have you finalized the dvd after you have recorded? This closes the DVD. Let me know I will ...
DVD. Press SETUP button. Once DVD has loaded the DISK FINALIZE option will be available. You can then FINALIZE. If the DVD is playing, you cannot access the Setup Menu. Press STOP, then SETUP, and you
Question about Magnavox DVD/VCR Dual Player
...DVD player: using remote control locate "setup" button and click.a dialogue box should appear indicating " audio setup" video setup" etc..... 2) select and scroll to "video setup". in video setup ...
Question about DVD-VR300 DVD Recorder/VCR
setup is incorrect. TV and DVD/VCR are hooked up via basic "cable", and I'm just not sure all "setup" is configured correctly... cable from wall/outside to cable box in, cable box out to dvd/vcr in ..
Question about Little Leaps Grow With Me Learning System
...Setup by pressing MENU on your DVD player remote control during the Setup process. Select ?Manual Setup? from the menu and follow the instructions on screen. 2. When prompted, try the first ...
...DVD-527 Press SETUP Press VOL+, VOL-, VOL+, VOL- Current RC should be displayed Select the RC with RIGHT and LEFT (255=Codefree) Press SETUP Turn the player off Coby DVD-202 / DVD-203 / DVD-207 / ...
...DVD Video Setup' tab will be highlighted; Using arrow keys around the 'Enter' key, press right arrow once to move to adjacent tab called 'HDD/DVD Setup'; Press down arrow once to move to 'HDD Setup' ...
Setup Guide. Your DVD player must be on the Auto-Setup instructions for this method to work properly. Engage Auto-Setup mode: Hold down the Red button until the setup light turns off. Continue holding
Question about Zoooos DVD System
...DVD Player and go to next step Press Setup button on remote to show the Setup menu Next key in code 1389, a different menu should show Scroll down to where it says Region 2 and change this by keying ...
...setup. Once you have removed the dvd from the dvd player it should allow you to go to "preferences" in the setup menu. So do that. Step 4: Go to "TV TYPE" and make sure it's on NTSC. And then exit ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions