Question about D-VR4 DVD Recorder/VCR
DVD player works fine. Suggestions? Try first to clean the video heads then if that dosent work take in the machine to have the heads professionally cleaned. God Luck there is a trick to clean the vcr
...with the DVD. VHS has sound no picture. sounds like the video head is dirty, you can try a head cleaner, sometimes tougher dirt on the heads may require manual cleaning of the video head. good ...
...What could the problem be?? DVD head alligment problem. open your dvd drive and locate small preset head laser LED (DVD head assembly) then turn it slowlly anticlock wise upto one degree then ...
...properties shows zero bit free space &zero bit used spacedbut cd can play in same dvd player read head tunning problem tune the present in head assembly in CCW direction slowly until it read ...
Question about 8XDVDEXT DVD External Slim Burner - DVD+/-R 8X, DVD-RAM 6X, DVD+/-R DL 6X, CD-R 24X Burner
Head Litescribe 24x DVD Tripple Format SATA writer? Gear Head has been nonresponsive. I am attempting to Install Windows 7 Ultimate from this DVD Writer and 64 Bit Windows 7 will not load the existing
...that there are two heads on for CD and one for DVD I think that maybe one of your read/write heads is faulty try and parse the DVD using DVD Shrink if this loads the DVD then your head is ...
dvd then says it preparing the disc then it ejects it The Optical head unit is faulty. The disc is not being read by the head unit laser and so conveys a wrong message which ejects the cd. Replace the
...the laser head you have to take some Q tips and gently very gently rub the little head on the unit then you should be good to go if not then the head is shot and the dvd player needs to be ...
dvd but can read cd Your laser head needs eighter cleaning or replacement. Use a cleaning CD with solution to clean your Laser head. if problem still exists you have to do a better cleaning by opening
Question about Magnavox DVD Player MWD200F
...DVD player to the head unit are properly connected and not damaged. Try disconnecting and reconnecting the cables to see if that resolves the issue. Check for firmware updates: Check the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions