Question about HL 5250DN Laser Printer
...print double-sided copy on card stock Side one prints, then retracts into the printer and jams. Regular paper works fine. It also prints single sided copy on card stock just fine. Is there a trick or ...
Duplex Printing How do you use the duplex printing feature on this printer? Unfortunately, this model does not support automatic duplex printing. You will manually have to feed the paper.
...print). Choose the advanced tab, on this tab near the top are five buttons with icons on, the second one shows two pages with A and B on, press this to access the duplex and binding options. In there ...
...be purchased if you don't want to buy the whole unit, but I am not sure which ones you are talking about as there are several in the unit. The printer may print fine as long as you don't print
...print page 1 on back side, then same with page 2 Check the section Printing Methods/ Duplex Printing/ Automatic duplex printing (For HL-5250DN) of the User's Guide, you can view online: ...
Question about Hl5370dw High Speed Wireless Mono Laser With Built In Duplex Printer
...duplex print but after a few papers print the paper going back in jams and it tells me i have a rear/ duplex jam when in reality it is not pulling it in straight. this is very frustrating as i have ...
...print fine. What else can I try? (I use duplex printing extensively.) Any suggestions appreciated. Check the C6200 Device Settings in the properties and make sure that the Duplex Unit is
...print both sides of the page automatically. You can only duplex manually, that is - you turn the page over and put it back in the machine to print on the other side. Some settings will allow to print ...
Question about HL-2130 monochrome laser printer USB Cable A male / B m
...duplex print you need to print the first page then feed that page through the Manual Feed system (Side to be printed up, top of page first) and print the second page on the manually fed page. ...
Question about HL-4070CDW Printer
...to print! Check the duplex settings, often you have a choice on long side or short side for duplexing. If short side is chosen then it will print duplex as though you are making a flip chart not a ...
Usually answered in minutes!
1,072 Questions
495 Questions
422 Questions
377 Questions
249 Questions