Questions & Answers for: dryer runs 10 min stops

...dryer runs you probably have a clogged vent pipe. This causes the unit to overheat and shuts down the burners. Clear all lint from the pipe, the dryer exit inot the pipe, and the pipe exit from the ...

dryer runs then stops. my dryer starts running, and after 1 min. it stops.. .it is almost as if there is too much friction and the drum can not overcome it and forces the motor to stop... IF LESS THAN

...10 min. this is a Knemore series 80 dryer... the dryer has a loud buzz when starting - if i hold the start button the motor will engage and the buzz stops. the dryer will run for about 5 min, then ...

dryer runs then stops after short periods (5-10 mins) my problem is that the dryer will start heat and tumble as usual, but after about 5-10 minutes depending upon the load will shut off. 10min to 30 ...

...dryer, it will run for around 5-10 mins but then the heating light will go out and the dryer will stop. Have changed the heating unit which has a couple of sensors attached to it for a new OEM module ...

...off. if you try to restart will not restart unless you hold start button down. once you let go will stop. wait about an hour and dryer will run for another 10- 15 min and start process over

...dryer GLER341AS2. The timer stops at 10 or 20 min. when I know it has run at least 30 or 40 min. OR my dryer will shut off with the timer at 20 min and the clothes are not dry (I usually set it at 40 ...

...dryer keeps stopping (the timer jumps), only runs for about 10 mins at a time AND the part that worries me the most is that I haven't had to empty the lint trap which I usually do after e Hi, My ...

...dryer idv65 runs for 10 mins and then trips the electric and stops when allowed to cool for 5 mins it will restart if its an old dryer its probably the motor thermostat heating up and shutting the ...

...dryer stops after 4 min on all settings then when I try to turn on it just makes a loud humming noise. Then after 5 to 10 min it will turn on, If the hum is loud I would suspect something is jammed ...