Questions & Answers for: Whirlpool duet the drum is jammed

...drum mechanism Somehow a ring got past the rubber seal when the maching was on high speed spin. The machine made a noise consistent with something getting jammed in the mechanism - i thought it was ...

...drum will turn slowly, but at the spin cycle it just clicks - even when there are no clothes in there! We just replaced the motor, and the spin cycle worked for a couple of loads, but now we have the ...

...and rotating drum by hand using a piece of wire try to move ring towards the opening it may work if the ring is not jammed if so you will have to dismantle the front seal and get it that way good ...

...drum is jammed? Try turning it by hand, and make sure nothing has gotten under the drum rim to jam it. If it is not jammed, then perhaps the belt broke. You have to take the back off to see the belt. ...

...jammed front of washer and pulled front apron/seal away which caused water to leak out front. Fixed the seal and turn the washer on. The water turns on to fill the basket but now the motor will not ...

...drum and its housing and you wouldn't see space inbetween the drums because the water would spill out ;-0) Sorry but I do not know your particular machine BUT I would suggest as a first step that you ...

there is something in the drum housing between the drum and the house that is jamming the drum. how do i get into the drum housing to remove it? You can remove one of the baffles inside the spin ...

...drum turned once, stopped and again hummed. Have tried using drain-spin again - no luck. Tried unplug for an hour and still Your pump is jammed with a blockage, remove the filter and check the pump ...

drum won turn The drum is stuck firm, I can see the belt turning but the pulley and drum are not turning. It was making noise several washes before and now the drum is stuck firm Wow, check around the

SOUND WHEN TURNED ON In most cases because something is jamming the blower fan which also spins the drum. Or one of the drum wheels is stuck and the motor is struggling to get it going