Questions & Answers for: Sharp the drum is jammed

Question about AL 1631 Copier

1 Answer

...opening them to get the jams out. Where is the paper jamming? Out of the paper tray or under the drum or in the fixing unit? Did you make sure you have the paper tray set up to the correct paper ...

Ad

drum, then it bunches up accordian style and the machine stops and the paper jam light comes on. I have to pull the jammed paper out and this ends up making a mess of toner inside the machine. Is this

Ad

...drum - sealed in a light-proof bag was jammed into the shipping box and I have no doubt that the defect in the drum surface was caused by this poorly packaged shipment. I reinstalled the old drum and ...

...jammed up inside the drum process unit (that black frame that holds the drum) and it's keeping the drum from turning. Check the drum/process unit and make sure they are clear of any material that ...

Question about AL-1641CS Laser Digital Copier

1 Answer

need to reset the drum counter on the AL 1740 sharp while changing to a used drum Entering in the simulation mode:press Clear - Interrupt - 0 - Interrupt -Main code - Start -Subcode - Start. When the ...

Question about AL 1631 Copier

1 Answer

...This means that a gear is jammed or broken somewhere. Check for waste full and empty or drum waste roller and unblock the jammed toner inside that unit or check fuser gear if broken then replace

Bad copies with white lines on paper sharp color copier AR C172M. opc drum or fuser? could be either or LSU glass, or charge corona. inspect drum and fuser and look for similar patterns. do a skyshot

Question about AR-5320 Black and White Copier

1 Answer

L4 problem Main motor lock. Your drum may be jammed in the cartridge, occasionally the urethane blade that cleans the drum may flip and hold the drum. Or your waste auger may be choked with toner.

showing paper jam when there is no paper jam make sure there are no papers left in the drum unit. and check if there is any little or torn paper left inside the machine

Sharp MX-5140n printer. It has Error 'ppd2_drum Drum lock detection error'. Every time I send job from the computer to my sharp MX-5140n printer, it hangs in the right tray section, at the same spot ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment and Supply Experts

k24674

Level 3 Expert

8093 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...