Questions & Answers for: Konica Minolta the drum is jammed

...jammed ) and that the drum is not inserted. I have installed and removed the drum NUMEROUS times and still get the DRUM and PAPER JAM message. I have also replaced the fuse with the radio shack ...

black line on left side only Pulled out drum kit to clear paper jam, no just get black line drum kit? ok you might have to repull it and look for more paper stuck somewhere blocking your toners.

...copier says code sc23-03 SC23-03 code is the M-2 Motor Drum. To clear PWR Off/Then ON. If it returns either the Motor or Main Board. Also check the drum it may be jammed or paper is causing it to

media jam transfer roller directly below the drum ensure transfer roller properly installed also check the drum unit

It started with paper jam, then it rejected the fuser unit and all the four drums. Any help please? I bought the machine as a second hand. It was photocopying very fine in both color and black modes; ...

...to check the cleaning blade and toner roller remove the drum cartridge. Drum could flipped the cleaning blade toner roller could have jammed or motor bad great jam. worst case control board

What is error code c-2401? Clean the drum sensor that monitors the drum, and the surrounding area. also has the developer and drum been replaced.to clean the drum sensor the drum must be removed. do ...

I have changed the drum not developer of bizhub 250, after running f8, now when I copy something paper gets jam and when sometimes it comes out of printer, it is blank. plese help in solving the issu ...

Biz hub konica minolta 601 and he show me a trouble code c-2804 kindly solve this matter Remove the drum and clean the two sensors facing the drum one is white the other is clear, DO NOT use a wet rag

2809 code in konica minolta 600 how to resolve Remove the drum unit then the drum and clean the sensor that monitors the drum. it will have a small with cover the clear cover sensor is for paper jams.