Questions & Answers for: Hyundai XG300 drive

hyundai 2001 XG300 tensioner pully adjustment i am trying to replace the drive belt on my 2001 xg300 but i dont know how to adjust the tensioner pully. What steps do i need to take to get the job done

...connected to your throttle. Instead, your throttle is controlled by a motor. In essenece, it is 'Drive by wire' throttle (not cable). The sofisticated electronics used to control your throttle ...

engine light on-engine pulls when driving 2001 hyundai xg300, when driving at a normal 30-50 mph speed, the vehicle jerks or pulls. the engine light came on. can you please help. If you can't comply ...

2000 model xg30,when started idles at 600-650rpm,once driven and whilst driving,idles at900rpm in drive and 1300rpm in park/neutral.Maf sensor is ok,do you think it could be an air leak or a carbon ...

...& InstallationRaise and support the vehicle. Remove the engine splash shield. Rotate the drive belt tensioner clockwise to release the drive belt tension. Remove the drive belt from the ...

I drive a Hyundai GX30 December 1999 model. The problem I have is that when you engage D on automatic mode it will drive fine for a while changing from 1, 2 , 3 upto gear 4 showing on the dash board ...

gear disengagement while driving an automatic car. When I try to re-engage the gears it drives on but dis engages. When the gears dis engage the gear level indicator lights on the dash board control ...

My vehicle stopped dead at set of lights and would not start, called RACQ he installed new battery $165 Stated that was problem, drove less than 1/2 kilometre down road, felt the vehicle ****. ...

Failure to restart after or during travel If it is dying while driving, but not chugging to a stop, and if you happen to notice the dash lights dim before the event I would imagine it is the ...

My Hyundai Grandeur XG30 has a gremlin. It puts itself into "Limp Mode" and Check the Engine light flashes. I have had it at 2 mechanics plugged it into a computer and neither know whats ...