floppy drive hi i got a problem and my floppy keeps on coming up as a 5.25 360kb and the drive itself is a 3.5 1.44mb drive This problem is your motherboard setting in bios. Change the bios by press ...
Question about Versa LitePad PC Notebook
Can't get NEC Litepad to recognize new Toshiba 1.8" MK2004GAL I've bought 3 drives and spent countless hours. I can't get any computer to recognize the drives - even with adapter build specifically ...
floppy drive light stays on all the time please remove the floppy disk if inserted floppy drive...........or unplug the floppy drive .........or check the motherboard setting....some times light on ...
Question about FD1231M 144MB 35" Internal Floppy Disk Drive (Black) (1345067906034) Internal Floppy Drive
NOT APPEARING IN MY COMPUTER If the Floppy Drive is not appearing in my Computer, open the PC and check that the cables are connected to the drive properly. Also open Device Manager and check under ...
Question about FD1231M 144MB 35" Internal Floppy Disk Drive (Black) (1345067906034) Internal Floppy Drive
you need to format the disk in drive G before using it. Then when I click ok it says cannot be formatted. Hello, the internal floppy drive is ALWAYS drive A: ...so be very careful you're not trying to
I have lost my floppy drive driver UF0002, I like to have that back so I can use my external floppy drive You should not have to have a floppy disk driver as the machine (IBM format) recognizes the ...
Question about FD1231M 144MB 35" Internal Floppy Disk Drive (Black) (1345067906034) Internal Floppy Drive
How do I make the floppy drive B? Open the Disk Management console (diskmgmt.msc). Right-click on any drive, and select Change drive letter and path. Windows will let you know if the drive letter ...
Question about FD1231M 144MB 35" Internal Floppy Disk Drive (Black) (1345067906034) Internal Floppy Drive
How do I add two floppy drives, A and B? There are no jumpers to set. If you're using an IDE cable and a fairly modern motherboard, just plug one IDE into the first drive, the second IDE into the ...
Question about Epson Combo 5.25 and 3.5 Floppy Drive (SD880012) Floppy Drive
I am installing an EPSON SD_600 5.25 inch flopy drive into a gateway computer. Which if any jumpers do I need to change into order to have this drive share a data ribbon cable with the existing 3.5 ...
Question about FD1231M 144MB 35" Internal Floppy Disk Drive (Black) (1345067906034) Internal Floppy Drive
where does pin 1 go on the floppy drive itself. on the right or left just flip the cable around, its not going to ruin the drive, it's a 50/50 chance, and you will know when you have it right when the
Usually answered in minutes!
244 Questions
160 Questions
63 Questions
51 Questions
45 Questions
