Questions & Answers for: Hyundai drive

...the pulley. Tell you what... No response, then I can't help. If you're talking about the accessory drive belt tensioner pully, there are two 12mm bolts which mount it to the engine. You'll need a

...& Installation Raise and support the vehicle. Remove the engine splash shield. Rotate the drive belt tensioner clockwise to release the drive belt tension. Remove the drive belt from the ...

4wheel drive light is blinking 4wheel drive emergency lightl is flashing and car is surging when driving there is NO '4wheel drive emergency' light on a 2006 Tucson.

...the timing belt on a 2003 Tiburon 2003 Hyundai Tiburon 2.7L MFI DOHC 6cyl Inspection Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, ...

...& InstallationRaise and support the vehicle. Remove the engine splash shield. Rotate the drive belt tensioner clockwise to release the drive belt tension. Remove the drive belt from the ...

...interval for a timing belt is approximately 60,000 miles (96,000 km). Inspection Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, ...

...8th digit (Engine Type) will either be "S" or "H" as in  the table above.To locate the Engine drive belt, jack up the vehicle & place it onto jack stands, then slide under the car (toss a ...

what is the drive cycle for 1996 jeep cherokee A term relevant only to the engine computer's operation. The computer counts drive cycles for a certain few functions, like for example, a ...

...belt located on Hyundai Sonata 2001 Alternator? I believe you are referring too the Accessory Drive Belt for the Alternator...See attached drawing To Remove: Raise and support the vehicle. ...

How do I complete a drive cycle for Hyundai xg350 Take a drive on the highway and that is a drive cycle.Are you having to do so many drive cycles to make engine light go out. A standard completed ...