Water drips out of steam holes I followed the manufacturers instructions in filling the iron and letting it heat up and produce steam. The tank was not overfilled. The controls were set to high steam ...
Question about NI-H10NS Iron
...dripping from the iron plate when using the steam. It did not do this before could you tell me what the problem is? Thanks That means that water is not heated properly and does not produce steam. Try ...
Question about Effective DX1900 Iron with Auto Shut-off
Dripping brown-spotted water on clothes while ironing. Your water could have high iron content, therefore empty out the old water and use Distilled water in the iron. If you are using Distilled water ...
Question about Steam Generator DG050 Iron
my rowenta professional iron drips, how can I fix it? Are you using distilled water to refill your iron? Distilled water can cause drips if used all the time. Refill with tap water and see if the ...
...dripping has not STOPPED. It not that old of an iron. Hi, Here is a tip that will help you with that problem... My Steam Iron is Leaking Water ...
My iron drips discolored water on my clothes while I'm ironing. What is the best method to clean my iron to avoid this problem? Hi, Try using different water... Here is a tip that will help you with ...
...iron is dripping rusty water Today i turned on the iron, i started ironing at 2nd hotest temperature. Then i lowered the temperature by one and the iron started dripping rusty water this iron has had ...
Question about Shark GI490 Iron
...silk garments. Using the iron and its steam functions as the manufacturer intended can reduce or eliminate dripping. If that doesn't solve your problem, consider additional steam iron
...is switched off. if your iron has a filler cap or water container ensure they are fitted securely. water dripping usually when the iron is too cold to turn it to steam or you have a leak
Question about Shark GI490 Iron
Murphy richards steam generator drips water from sole plate Produces steam but also drips dirty looking water onto the ironing. Had one replacement already for the same problem. Probably poor design
Usually answered in minutes!
202 Questions
119 Questions
145 Questions
74 Questions
82 Questions