Questions & Answers for: drill torque

...drill torque? Torque, which is measured in foot-pounds, is the drill's maximum amount of turning force. Some drills have an adjustable clutch with different torque settings for different

Torque adjustment ring is stuck. How do you fix it? in drill mode slips will not tork I had the same problem on my new DeWALT DC920KA I just got. It would tighten up around a torque ring setting of 19

...drill (with the torque setting at "max") or as a driver (with the torque setting at less than max) some electric tools are configured as both, but usually they are different. For the money, a good ...

...torque settings are not tightly controlled so they are not all that repeatable from drill to drill. They also vary somewhat with the speed of the drill and the condition of the battery. And they ...

How do I select torque setting? How do I select torque setting on a DeWalt cordless drill? the black ring behind the chuck, has numbers on it, turn to desired torque

...after chucking up a bolt. Set the wrench for your desired torque and adjust the clutch on the drill until the wrench indicates the clutch torque value is what you desire...just a thought. Take

...drill. The torque settings on a drill will stop the drill from driving the screw ( or what ever you are tightening ) when it reaches a specific "tightness" . For example; the setting "1" will only ...

...mode that will slip when a certain torque is reached as set by the ring around the chuck area.  If you want it to not slip, usually you set it on a symbol that looks like a twist

...drill" position - this will switch off torque limiter. If problem persits, check the clutch. Mains powered hammer drill or pneumatic hammer - did it work fine it the past? What diameter of the drill ...

...torque settings don't seem to be working.when i am drilling screws the drill will just drill until i release the trigger.is this a clutch problem?. Many thanks. Try to put it on the lowest torque and ...