Questions & Answers for: Linksys dr 20

...20 and 21 SMTP uses port: 25 POP3 uses port: 110 Getting Started 1. You must set a static IP address on the server. If you're unsure of how to do this please go to Answer ID 534 for information ...

Wireless G Broadband 2.4G Router Setup. Laptop will not connect to internet. ISP HughesNet Try to reset the router for 20 seconds. There's a reset button at the back of the router. Just press and hold

changing password I was given a linsky wirelless-g 2.4. I need to change the password but don't know how. You need to unplug the router, hold the reset for 20 seconds...plug it back in, let it boot, ...

i want to download latest firmware Try this: http://drivers.softpedia.com/get/FIRMWARE/Others/Linksys-WRT54G.shtml Good luck Dr Geek MD

...at your Router for a wireless button if it has one hold it for 20-30seconds then return to your PC/laptop and it should come up on connect or disconnect again on control panel. Hope I helped Dr ...

...ULR 7. Do the same (click exceptions) for all of the others BUT NOT POP UPS!!! Hope I helped Dr ...

...card on my Dell Inspiron 1720 laptop running Vista. The wireless card is working fine on the Dell, drivers are up to date.Suggestions? Thanks! Have you had a look on the firewall website for a ...

router keeps dropping connection Solution for wireless dropping issue or connectivity issues *Change channels on the router from1,6,11 or 9(rarely works) *Change Channel width 20 or 20/40 MHz *Keep ...

lost password need to reset router and put in new password Hold the reset for 20 seconds then release it. Unplug it and hold the reset for another 20 seconds, without letting go of the reset plug the ...

unbrick router e2500 If you installed dd-wrt for your new router firmware it's possible you installed the wrong firmware. In most cases, it's permanently bricked. If not, you can try the 30/30/30 ...