Questions & Answers for: dot 4 break fluid

...your brakes working before buying fluid check the reseivoir top for the dot rating of your brake lines you can go up 1 point but not down eg if dot rating is 3 you can use 4 which is more ...

...DOT 3 is fine. x3 RTM? yet best for most is Dot3/4 and label shows, low, hygroscopic. (means don't soak up water fast , for longer life brakes) dont break your brakes. RTM and its not oil, it fluid, ...

...fluid, any power steering fluid will work. If we are talking about brake fluid, Then yes use DOT 3 brake fluid or DOT 4 break fluid. The top of the master cylinder should tell you which to

kia sedona break fluid can i us white dot 4 break fluid for my kia sedona do not mix dot 3 and dot 4! only use what is specified on the brake fluid cap

...you add brake fluid in that bottle if it's missing oil ! My 2005 MINI Cooper S' clutch  uses break fluid from the same reservoir as  brakes. Just make sure it's DOT-4

what type of break fluid goes in the 2002 KIA Rio? You can use DOT 3 or DOT 4..Either one is fine to use as they can be mixed. DOT 4 will have a higher boiling point.

...DOT 3 brake fluid and the vacuum line that attaches to the brake booster is in place and not leaking or disconnected at either end, check for leaking fluid on all 4 tires, if you find no fluid at the ...

What type of break fluid is used for a 98 marauder Take a look at the top of your brake fluid reservoir that should tell you what you need. But generally DOT 4 should be acceptable.

add break fluid Please don't add until you check all brakes for wear. Low fluid is a indicator of worn pads and rotors or a leak. The cap on your master cylinder will tell you what fluid(DOT #3 or 4)

dot 4 break fluid and must the system be flushed before changing to dot4??? Systems designed for a particular type of fluid ( especially prior to the wide distribution and use of DIT 4 fluids ) should