Questions & Answers for: GE door sticks

Door is hard to open ON GE Spacemaker it appears the door hinges have "sagged" a little or something causing the door to stick a bit when pulling open. Can hinges be tightened, replaced, etc.? Or can ...

The ice maker is working fine but ice cannot be dispensed because the chute keeps on freezing The door to the chute is sticking slightly open allowing moisture in an freezing the chute and the door is

I have a GE side by side. The freezer door will not stay sealed or closed anymore. I have to tape it shut. What can I do? make sure unit is level side to side and front to back if still problem check ...

...sticking out and seal is loose how is it attached round wire was sticking out and seal around the door is not tight. how do I tighten it up and put it all back together so it wont leak Electric

freezer door won't close completely Check that there is no build up of ice that could be preventing the door from closing. Are all the drawers pushed fully in and is there any item in the freezer that

During express or timed cooking, opening the oven door does not stop/pause the time display count down. Also after completion of cooking cycle, display will show the normal "Food Is Ready" ...

...This is either a sticking relay, in which case you'd need circuit board repair, or a sticking door switch or defective door switch mount.See my help file on door switches here.If you need ...

Can I replace the door locking mechanism on a GE JVM1650 microwave oven? If you are talking about the 2 hooks that stick out of the door, in most cases yes they are replaceable. also the switches ...

the freezer door will not open. it feels locked There is no lock on that door and the only latch is a magnetic gasket around the door edge. It sound like one of your frozen packages make have shifted ...

GE Adora dishwasher door will not close I filled the washer and went to close the door and cannot close all the way. Won't latch. Feels like something is in the way but there is nothing sticking out. ...