Questions & Answers for: Hotpoint door seal

Question about Aquarius WF000 Front Load Washer

1 Answer

Door seal Is it possible to get instructions on how to fit a new door seal on our washing machine? i will tell u step by step 1)open the door undo the clamp that holds the front of the seal on it is ...

Ad

Question about WMA46 Front Load Washer

1 Answer

...door seal on your hotpoint wma46 and the door wouldnt lock, i have just changed the door seal on mine and have the same problem with the lock, could you tell me what you did to fix it please? thanks ...

Ad

Question about Ultima WF860 Front Load Washer

1 Answer

...door seal How I do I remove and replace door seal with a new one Thanks un-plug the washer take the lid off now open the door undue the clasp that goes around the rim of the door seal on the outside ...

Question about Aquarius WD640 Front Load Washer/Dryer

2 Answers

door seal This washing machine is leaking down the front of the door, so I am guessing we need a new seal. I don't really want to pay a small fortune for this, so am prepared to try and fix it myself.

Question about WMA46 Front Load Washer

1 Answer

...Door Seal How do I change the door seal. turn off at mains remove clamp that holds door seal to cabinet. peel door seal off cabinet. remove worktop undo clamp that holds seal to tub. pull seal away ...

Question about Ultima WF860 Front Load Washer

1 Answer

Door seal has two holes in it and leaking I have purchased a new door seal/rubber for a Hotpoint WF860 Ultima, How do I change the door seal, as it is not mentioned in the user manual. Hi. You need to

Question about Ultima WF860 Front Load Washer

2 Answers

...door seal on hotpoint ultima 14 months old i discovered that my washing machine started to form mould on the door seal.over the past few months it has spread ,all around the door seal.I have looked ...

Question about Ultima WF860 Front Load Washer

1 Answer

...door seal, on the front of the cabinet. Insert a small screwdriver or similar into the lip of the door seal, there you should see the band, prise it off, and then pull the seal of the front of the ...

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

door seal for any sign of a hole or tear in the seal. Or it could be leaking from the drum front or the drum front seal, this is another seal , not the door seal., you cannot see this without removing

...with the news paper in between of the door and seal. If you can pull it through really easy then the seal is at fault if not then check your cooling fan in the freezer section it should be

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machine Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...