Questions & Answers for: door pin

Question about T-49 Side by Side Refrigerator Commercial

1 Answer

...pin Each door has a round metal pin that can placed according to how quickly the door closes. It appears to be a spring loaded cylinder at the top of the door with holes in it. You turned that ...

Ad

Question about 2003 Wrangler

3 Answers

...door pin inside the socket of the door hinge. I had the same damn problem with my 2003 Rubicon and I eventually solved it by taking out my torx bit set and removing the door hinges with the doors ...

Ad

Question about 2003 Wrangler

1 Answer

...door pin not making contact with pin. Open the door, set the timer to run, now use a small screwdriver to press the door lock switch. If machine doesn't run then suspect switch, if it runs then check ...

...pin? door pins are available at dealer and part store to change you have to remove the door from truck and change the pins I have changed pins individually without removing the door but it depends on ...

...pin from the door panel . With the pin out of the door panel push the center pin back out of the push pin retainer so it will be ready to go back in)Then remove the screw cover behind the door pull ...

Question about 1992 Firebird

1 Answer

diagram of the door pins The doors don't close right. There is alot of play in them. Someone said I needed new door pins. Can you show a diagram of the door pins please? [email protected] AUTO PARTS ...

door/hinge pin-kits for Ford products. (If not order from your local Ford dealer) The pins may need heated with a torch and driven out with a long spline pin punch. You might want to get a mechanic to

...pin and grommet.. Test door swing and alignment. If the door still hits low on the catch post, loosen those torq bolts after lifting the door slightly and now lift the door the distance it was low ...

...door hinge pin, and tap it into place with the hammer. 7. Insert the new hinge pin into the hinge. Tap on the hinge pin with the hammer and nail punch to force the pin into the hinge. 8. Insert the ...

door pins. The top pin goes in upwards and the bottom pin downward. Make sure you put a jack under the door frame to ease pressure on the pins. Tap pins lightly to remove them. Just like a house door.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Refrigerators Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...