Questions & Answers for: door lock install key smooth Locks & Locksmithing

...2005 aveo and the driver side door lock went inside the door and i want to know were to take it to get it fix and also the passanger side door the lock also moves to and mit go down in to the door

Key stuck in Driver's side lock My doors have to be opened manually with the key, and this morning (after a cold night) the key went smoothly into the lock, but then would not come out. We tried ...

door latch (the part the actuates the latch). All the doors open and close smoothly, however when I attempt to lock the vehicle it locks all the locks and then unlocks them all right away. I can stick

...inside door panel off to see it hi, iam instaling a security sistem in a chevorlet trailblazer and the door lock does not work , its any way to make the lock work without the baypass module , ...

...with inserting key into to drivers side door lock Silicone spray lubricant is great for keeping lock mechanisms free of moisture and rust. A small amount is the key to unlocking smooth

...lock, but if the key has to be inserted with the teeth up and you prefer with the teeth down, just remove the 2 screws holding the halves of the door handles on, and remove the outside one, rotate it ...

...lock works easily with the door open, the strike plate is not lined up correctly. If it is hard to turn with the door open, loosen all the mounting screws and be sure the inside and outside parts are ...

...Door locks twice when hit lock button I inserted the batteries and held down the lock button, and after the initializing, a solid red light remains on in the back. Now, it locks twice when I hit the ...

...door lock up to pull key Eventually doors work normal with remote-Strange does not happen all the time 4 things to consider. 1. Does your key fob transmitter need a new battery. Replace battery. 2. ...

...lock from inside some cars had the mechanical levers inside the doors disconnected as remote control actuators are used ,check out to see if they are connected still if the actuator is connected ...