Questions & Answers for: GMC Sonoma door hinge replace

...hinge location. If there is play there, replace the hinges. To remove door hinges, place a floor jack under the door for support while u remove hinges. There should be some adjustment at the hinges, ...

...door and then replace the handle. the only bad part of that is the inner door panels normally do not come off in once pice that is able to be reinstalled without being cracked or completly broken. ...

...door. I feels like a cable or a broken hinge in there. How do I fix this? Any info would help you can usually access the operation handle for the tailgate through a panel located on the bed side of ...

...door. How can I replace it, what is it called and where do I find one? its 150.00 dollers at the deler or cheper at auto zone the 3rd door panal comes off and the bolts that holds it in is in ...

I can't get my 95 gmc tailgate to come off. I know that you usually open it alittle and it will come off. But mine will not. So I would like to know if there is a trick to taking a 95 sonoma tailgate ...

...it off and see if you can manually rotate the door hinge. If yes, replace the actuator. If not, you will have to remove the heater box to find out why the door is jammed. The actuator looks like

...door but I do not know how to install it and I am looking for some step by step instructions. Any help would be greately appreciated. there is a "z" shaped spring that fits around the hinge plenty at ...

...hinge hole is egg shaped the new bushings will not last. the door will hang again in a few weeks. this is where is get costly, the hinges now need replacing. i have gotten good at welding the holes ...

hinge" where the wiper arm pivots is partially ceased and not keeping the blade against the window. To restore the wiper blade wipe Downy fabric softener on the rubber blade or lubricate the wiper arm

... you should see a metallic engine protector cover and on the front side you will see a small hinged door with one screw holding it shut. You turn that screw out with a screwdriver probably a half a ...