Questions & Answers for: Pontiac Grand Prix door handle

...door handle will not operate how do you remove passenger door panel to access door handle mechanism? You unscrew the instrument pad and then unbolt the inner door handle. Then detatch the upholstry ...

...door handle completely exposed. Can't figure out how to work the latch. there are to rods one for the lock and one for the handle pull the handle rod if it is exposed pull on it / The only way to ...

...door handle assembly by removing one black 14mm nut from just above the door handle, and 1 screw (usually phillips) from the bottom of the plastic cover. Remove linkages from lock cylinder and door ...

...the door itself. Then you either need to get a door handle remover and remove the C-clip that is behind the window handle. After this is off the handle comes off and then you can just pull the door ...

...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door ...

...handle to open the door. I just clicks like its locked. We had to realign the locking mechanism on the inside of the door because it was loose. I opened the door once just on chance, but haven't been ...

...door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door ...

...door handle on a 1986 pontiac grand prix Remove the inside door trim from the door remove the weather protection from the inner door panel now look up inside the door and you should see a small rod ...

...door handle of a 2000 pontiac grandprix? Hello, To remove the exterior door handle of the 2000 pontiac grand prix, You will be needing these instruments, wrench set, Putty knife, Screwdrivers, Socket ...

both handles on 1996 grand prix broke how do I replace them handles on side of door, door not locked handles just not working there should be a couple star bit bolts on inside of door behind the ...