Questions & Answers for: door 1996 ford explorer open

...door handles breaking on 1996 ford explorer? yeah they break all the time. if your not having problems getting the door open from the outside handle, then your door latches are probably fine. the ...

...1996 Ford Explorer XLS. The left rear door will not open from the inside, but will open from the outside and the child safety lock is off it too. What is wrong with it? It sounds like the door handle ...

...door of my 1996 ford explorerbut the auto door locks work great. Please help! The key engine within the door must be on the hook. the door panel will need to be openned from inside to allow the ...

...1996 ford explorer and neither of the back doors will open from the inside but they will both open from the outside. I suspect the link came off the door latch. They are plastic and break. Rate as ...

1996 ford explorer after jump starting dead battery due to headlights left on the horn blows and door locks open and close usually shortly after I start vehicle.Also randomly as I am driving. ...

...Ford Explorer will not lock all doors The Fob on my 2001 Ford Explorer will open all the doors but will not lock the front two driver and passenger doors. It does lock all other doors. The problem is ...

...1996 Ford Explorer will not not turn-off with any normal method. Electronic keypad unlock on driver's door will not disable, starting the car will not disable, unlocking with remote will not disable. ...

...1996 ford explorer and it has no heat, we replaced the Blem and the thermostat and it still has no heat, any ideas? Someone mentioned a door on the heater core. If it is stuck open or something, what ...

...1996 in the fuse panel on the driver's end of the dash - visible with the driver's door open - in location # 20 is a 7.5 amp fuse for the radio and in location # 29 there is a 10 amp fuse for the ...

1996 ford explorer door ajar chime goes on and door locks constantly open What's wrong Door ajar sensors on explorers get disconnected, sometimes the magnets get stuck. Spray WD40 or a lubricant on ...