Questions & Answers for: dont know admin password dlink

dont have router protected (is not yours anymore).to gain control again, you can rest config. but you need your router manual nerby, to help you config. a previous internet provider config. and so on.

dont know wat are the steps to make it work. i i can make the first two i write 192.168.0.1 them it open a box with the user name and paswword. once u put admin and leave the password at blank . u get

dont know the password and user name want to connect n95 to dlink DI-524 but dont know the password and user name of dlink DI-524 how do i get it and start internet on my mobile? http://192.168.0.1 ...

...DONT NO HOW TO PUT PASSWORD ANYBODY HELP ME 1- connect through ethernet 2- the default ip @ is 192.168.0.30 (check the manual :)), mask is 255.255.255.0 [make your pc in the same subnet] 3- enter the ...

...dont know what to do hold the reset button for 10 seconds then let it sit till the lights stop flashing. then you'll be able to log into the router w/ the default user/password which I believe is ...

dont know what my username and pass is and i need to open some ports how can i do this? For that connect your router to computer with ethernet cable. Then you can access it with following link. http:/

dont have a cd drive My computer is a dell inspirion and is runs on vista hello, here is what you need to do: if have a pc connected to high speed modem directly you will unplug the network cable from

dont know my user name and pasword If you didn't change it the default is leave the login blank and the password is admin If you did change it then all you can do is reset it to factory defaults Power

...dont know where to enter it .Can you help me? if this is on the computer enter it in the box that comes up when you turn on the wireless, if it is in the router config go to 192.168.0.1 in internet ...

...dont know the username and password If you are trying to access the router itself via it's IP address (192.168.X.1) where X is usually 0, 1 or 2... The username and password should both be admin ...