rinse and hold cycle. How can I change it??? Hello, Welcome to FixYa. Your post doesn`t specify a model number, however on most Bosch dishwashers in order to change from "rinse & hold" to "regular
...doesn't rinse or spin. What's going on? hello, it sounds like a failed lid switch part #3949247 it wont rinse or spin with a bad lid switch. it also wont rinse or spin if there is no cold ...
...rinse cycle it doesn't fill up water, what can i do? If the only time that it won't fill with water is the rinse cycle is is probably either in the timer or control board. Have you tested it ...
...rinse doesn't work Everything else on the machine works exept the rinse function. The water heats up to around 185deg F and the display will show "Rinse" but I don't hear the ...
Question about 25 in. LXIH-4 Built-in Dishwasher
...and rinsing it doesn't spin the water out. Dosn't spin after wash and rinse cycle. Check the drain lines for clogs. If that checks out ok, then you probably have a bad drain
Question about 25 in. LXIH-4 Built-in Dishwasher
rinse it doesn't spin instead drain half of the water and add new water for new rinse, how to make it spin after the first rinse after first rinse it doesn't spin instead drain half of the
Question about 25 in. LXIH-4 Built-in Dishwasher
...for the next rinse why the washing machine doesn't spin after the first rinse instead it drain half of the water and add new water for the next rinse What is the model number of your
Question about 25 in. LXIH-4 Built-in Dishwasher
...II washer Doesn't move past rinse I replaced the coupling and put it back together and now it went to rinse and stayed there not moving along in the cycle. What is the model number of your
Question about 25 in. LXIH-4 Built-in Dishwasher
wash cycle works and the rinse cycle doesn't .. the first thing to checkis whether the cold water faucet is turned off or if the cold water hose is kinked or if the cold water filter screen is clogged
...rinse cylce it speeds up removing all the water, stops then adds a little bit of water and doesn't do the final spin. -I tested the lid switch by removing the screw driver during the rinse spin ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions